Hirschmann MS30 Operation & User’s Manual

15, Access to the user interfaces Layer 2 Enhanced with Layer 2 Professional Release 1.0 10/05 15 1 Access to the user interfaces The Switch has three user interfaces, which you can access via different interfaces: D System monitor via the V.24 interface (out-of-band) D Command Line Interface (C…

17, Access to the user interfaces Layer 2 Enhanced with Layer 2 Professional Release 1.0 10/05 1.1 System monitor 17 Fig. 1: Screenshot during the boot process V Press within one second the <1> key to start system monitor 1. < PowerMICE MS4128-5 (Boot) Release: 1.00 Build…

182, General Information 176 B.3 Management Information BASE MIB Layer 2 Enhanced with Layer 2 Professional Release 1.0 10/05 Fig. 74: Tree structure of the Hirschmann MIB A complete description of the MIB can be found on the CD-ROM that is included with the device. 1 internet 1 iso 3 o…

29, Entering the IP parameters Layer 2 Enhanced with Layer 2 Professional Release 1.0 10/05 2.1 Basics IP parameter 29 Example of a network mask: Example of IP addresses with subnetworks assignment when the above sub- net mask is applied: 255.255.192.0 Decimal notation 11111111.111111…

63, Hirschmann MS30 Loading Software Updates Layer 2 Enhanced with Layer 2 Professional Release 1.0 10/05 4.2 Loading the Software from the tftp Server 63 4.2 Loading the Software from the tftp Server For a tftp update you need a tftp server on which the software to be loaded is stored (see “tftp server…

105, Traffic control Layer 2 Enhanced with Layer 2 Professional Release 1.0 10/05 8.1 Directed frame forwarding 103 The Switch can learn up to 8000 addresses. This becomes necessary if more than one terminal device is connected to one or more ports. It is thus possible to connect seve…