LifeSpan Bullet Owner's Manual

30, 30 BULLET 11. TROUBLESHOOTING GUIDE Fault Code Description E01 Missing speed signal E02 Overload protection E03 Over-current E04 Open Circuit Voltage E06 Incorrect Communication E09 Incline Check Error E0P Speed Check Error EOC Short…

20, 20 BULLET 9. EXERCISE GUIDE PLEASE NOTE: Before beginning any exercise program, consult your physician. This is important especially if you are over the age of 45 or individuals with pre-existing health problems. The pulse sensors are not medical devices. Various …

18, 18 BULLET 3.6. Body Fat Test Mode (FAT): Use the PROG button to select the FAT mode. Press the MODE button to enter parameter for gender, age, height and weight. These parameters can be adjusted with SPEED+/- or INCLINE+/- buttons. After setting is complete, press MODE again. The …

25, 25 BULLET 5. Adjusting the Running Belt A B C Place treadmill on a level surface. Run treadmill at approximately 4km/h, checking the running condition. If the belt has drifted to the right: Whilst the treadmill is running at 4km/h, care…

28, LifeSpan Bullet 28 BULLET 4b. Some treadmill motors may use a push clip instead. In this case, gently push the clip inwards and then up to release it from its latch. 4c. Remove the clip, noting the direction in which it was originally placed, and put it safely aside. …