LONCIN LC 2000i Owner's Manual

14, LONCIN LC 2000i 14 CONTROL FUNCTION 3 in 1 switch knob ① Engine switch \fuel valve “OFF”; Ignition circuit is switched off. Fuel is switched off. The engine will not run. ② Engin…

34, 34 4. Place an oil pan under the engine. Tilt the generator to drain the oil completely. 5. Replace the generator on a level surface. Do not tilt the generator when adding engine oil. This could result in overfilling and damage to the engine. 6. Add engine oil to the u…

29, 29 Application range When using the generator, make sure the total load is within rated output of a generator. Otherwise, generator damage may occur AC Power factor 1 0.8-0.95 0.4-0.75 (Efficiency 0.85) LC2000i ~1,600W ~1,280W ~544W Rated voltage 12v Rated current8.3A …

4, 4 CONTENTS SAFETY INFORMATION..... .......................................................................6 LOCATION OF IMPORTANT LABELS.......................................................10 DESCRIPTION......................................................................…

25, 25 Alternating Current (AC) connection Be sure any electric devices are turned off before plugging them in. z Be sure all electric devices including the lines and plug connections are in good condition before connection to the generator. z Be sure the total load is wit…

38, 38 2. Hold and move up the clamp, then take off the hose from the tank 3. Take out the fuel filter 4. Clean the filter with gasoline 5. Dry the filter and put it bank into tank 6. Install the hose and clamp, then open the fuel val…