Vivotek FD816C-HF2 Operation & User’s Manual

64, VIVOTEK 64 - User's Manual Media > Audio Audio Settings Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted even if audio transmission is enabled on the Client Sett…

14, Vivotek FD816C-HF2 VIVOTEK 14 - User's Manual Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN. 1. Install IW2 under the Software Utility directory from the software CD. Double click the …

198, VIVOTEK 198 - User's Manual * It's recommended to use polygonsd * This parameter will not be used after the version number (httpversion) is equal or greater than 0400a. left <Not recommended to use this> 0 ~ 320 4/4 Left coordinate of window positio…

261, VIVOTEK User's Manual - 261 7.33 Region of interest Group: roi_c<0~(n-1)> for n channel product. (capability.eptz > 0) m denotes the value of "capability_nmediastream". PARAMETER VALUE SECURITY (get/set) DESCRIPTION s<0~(m-2)>_home <W,H> &l…

77, VIVOTEK User's Manual - 77 Network > DDNS This section explains how to congure the dynamic domain name service for the Network Camera. DDNS is a service that allows your Network Camera, especially when assigned with a dynamic IP address, to have a xed hos…

115, VIVOTEK User's Manual - 115 A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the preset threshold. If you want to congure other motion detection settings for day/night/sc…