Xpand X101 Operation & User’s Manual

1, XPAND 3D Cinema Glasses Instructions for 3D cinema glasses The active glasses X101 work in automatic mode – there is no power switch to turn the glasses "ON" or "OFF". Upon receiving the glasses, they are in the off‐mode, meaning that the glasses periodically …

2, rotating it leftwise from "c" position to "o" position. The battery should provide enough energy for 250 hours of use in run‐mode when the projector is set for "Triple Flash, 6:2", and 300 hours of use in run‐mode when the projector is set for…

3, Xpand X101 XPAND 3D Cinema IR Emitter System XPAND 3D IR emitter system generates the infrared signal that synchronizes the active 3D glasses with the digital projector. The family of emitters consists of four members and a sync distribution module: AE210‐Emitter, Long‐Range, Narrow …

4, The wide angle emitter should be used if the geometry of the room is such that a +/‐10 degree cone of radiation will cover only a small portion of the screen. It also may be placed near the screen and aimed at the audience. AE110‐Emitter, Mid‐Range, Narrow Angle This is …

5, When the system is first installed or verification of system operation is desired, the distribution module is supplied with a 60 Hertz frame sync generator built into the module. It is activated by pushing the on/off switch for "Setu…