Albatron KM400T-8X Series Operation & User’s Manual

21, KM400T-8X Series 18 Audio Connectors nel Audio Header: FRONT AUDIO een designed with embedded audio equipment or you are using an audio an attach these components to the FRONT_AUDIO header of the mper caps covering the FRONT_AUDIO pins. Use pins 1, 3 to nnect to th do …

16, KM400T-8X Series 13 Connector Conf Front Panel Indicato Dri This connector can be at er case. The LED will flicker during disk activi ives directly attached to the system board. RST SW (Reset S This connector can be a h is nor…

19, KM400T-8X Series 16 Clear CMOS Jumper: JP1 he CMOS . Turn off your system and disconnect the AC power cable. 2. Set JP1 pin 2-3 closed. e the jumpers “JP5” and “JP6” to select the CPU Clock. Refer the pictures below for details. The following pro…

29, KM400T-8X Series 26 Typematic Delay (Msec) The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000 figured. For OS 00 and Windows XP. ptions: 1.4 (default)、1.1 ating system with greater than 64 MB of RAM. ptions: Non-OS2 (d…

51, KM400T-8X Series 48 Problem 10: f you continue to experience problems. en. Monitor. m after installing a second hard drive. . Hard drives are not compatible / different manufacturers. jumpers correctly. ETUP program and select the correct drive types.…

39, Albatron KM400T-8X Series KM400T-8X Series 36 Power Management he Power Management Setup Menu allows you to configure your system to utilize energy power-up/ power-down options. d Type ystem. S3 (STR) Suspend to RAM S1 & S3 POS and STR Power Management Option …