MICRO-EPSILON optoncdt 1700 Instruction Manual

54, Page 54 Measurement Value Output optoNCDT 1700 7. Measurement Value Output The optoNCDT1700 can issue the measurement values either via the analog output or the RS422 serial inter- face. The two different types of output cannot be used concurrently. The analog output can be program…

63, Page 63 Serial Interface RS422 optoNCDT 1700 8.5 Commands 8.5.1 Overview Information commando 0x20490002 GET_INFO Shows sensor data 0x204A0002 GET_SETTINGS Shows sensor settings Average 0x20700002 0x20710002 0x20720002 0x20730002 0x20750003 SET_AV0 SET_ AV1 SET_ AV2 SET…

21, MICRO-EPSILON optoncdt 1700 Page 21 Delivery optoNCDT 1700 SMR = Start of measuring range MR = Measuring range 30 (1.2) 13.2 (.52) 15 (.59) 67 (2.6)4 (.16) 75 (3.0) 80 (3.15) 89 (3 5) 97 (3.82) 37.5 (1.48) Mounting holes 3 x ø 4.5 (.18 dia.) 24.2 (.95) 36.1 (1.4) 13.4 (.53) A B ø 8 ( 31 dia.) 15 (.59) 13.4 (…

9, Page 9 Safety optoNCDT 1700 1.5 Proper Environment - Protection class: IP 65 (Only with sensor cable connected ) - Lenses are excluded from protection class. Contamination of the lenses leads to impairment or failure of the function. - Operating temperature: 0 to +50 °C …

107, Page 107 Appendix| Pin Assignment PC1700-x/x/USB/OE/IND optoNCDT 1700 A 6 Pin Assignment PC1700-x/x/USB/OE/IND 9-pin Sub-D Pin Assignment Power supply unit PC The PC1700-x/x/ USB/OE/IND includes open leads for analog output signal and power supply unit for 90 ... 235 VAC. Len…

92, Page 92 Instruction for Operating optoNCDT 1700 9.2.6 Surface Roughness In case of traversing measurements surface roughnesses of 5 µm and more lead to an apparent distance change (also-called surface noise). However, they can be dampened by averaging, see Chap. 6.6. 9.2.7 Sensor Tilting…