Midtronics psc-700 Instruction Manual

11, 11 www.midtronics.com POWER CHARGE™ PSC-700 Protection Features Each Power Charge power supply/maintenance charger is designed with high quality components to help ensure years of continuous use. The Power Charge is protected by multiple protection features for a long, trouble-free life: …

9, 9 www.midtronics.com POWER CHARGE™ PSC-700 USE OF AN ADAPTER IS NOT ALLOWED IN CANADA. IF A GROUNDING- TYPE RECEPTACLE IS NOT AVAILABLE, DO NOT USE THIS APPLIANCE UNTIL THE PROPER OUTLET IS INSTALLED BY A QUALIFIED ELECTRICIAN. 4.3 An extension cord should not be used unless a…

5, Midtronics psc-700 5 www.midtronics.com POWER CHARGE™ PSC-700 1.4 Position the AC and DC leads to avoid tripping over them and to prevent damage by hood, doors, or moving engine parts; protect from heat, oil, and sharp edges. 1.5 Do not operate the charger if it has received a sharp blow, been dropped or …

14, 14 www.midtronics.com POWER CHARGE™ PSC-700 Troubleshooting Guide Problem Possible Causes Action 1. No Output 120 VAC supply not connected Connect power supply Check AC distribution panel for proper operation External Fuses Blown Check for reverse polarity Replace fuses with same typ…

13, 13 www.midtronics.com POWER CHARGE™ PSC-700  Reverse Battery Protection Fuses  Screws for cable connections. Use a 5 / 32 hex driver to tighten the output screws. IMPORTANT: Do not exceed 50 in-lb. torque.  Total Charging Management System (TCMS) plug NOTE: The TCMS plug must…