MIMAKI JV300-130/160 Print Manual

3, - 3 - Prepare JV300-130/160BS INK MODEL Following the procedures below, prepare JV300-130/160BS INK MODEL. 1. Connect a PC in which the attached Ras- terLink is installed with JV300-130/ 160BS INK MODEL. • For details, refer to Chapter 1 “Connecting Cables” of JV300-130/160BS INK MODEL Opera…

8, - 8 - 4. Download the profile. • If there are profiles that meet the settings, the list appears. (1) Select the profile to install, and click [Next] (2) Click [Finish] to end the download procedure. • The profile is installed when RasterLink6 is started next. Refer to Installation Guide o…

2, MIMAKI JV300-130/160 - 2 - First, confirm the following items: About system configuration Instruct to print the printing data created with the application such as Illustrator or Photoshop etc. from the PC in which the attached RasterLink has been installed. Send the data to be printed to the PC in which Raster…

5, - 5 - Perform printing Here, the printing method using a sample image included in the CD of the JV300-130/160BS INK MODEL Oper- ation Manual. 1. Double-click to start the attached RasterLink. • The main window of the attached RasterLink is displayed. 2. Set the CD of JV300-130…

9, - 9 - Typical questions The answers to the questions/ the troubles frequently asked by the customer are provided. About errors  “Replace a Wiper”is displayed Time for replacement of the wiper has come. Replace the wiper by following the procedures in Chapter 4 “Replacing the wipe…