MIMAKI SIJ-320UV Operation Manual

77, 4-5 4 2 About Maintenance MENU This provides various settings for doing maintenance on the machine. The following items can be set in Maintenance settings.  Press the key to perform “Station maintenance”. The Station MENU can be displayed easily without selecting [MENU]-[M…

62, 3-12 About Machine Setup MENU Common settings are functions for using this machine easily. The following items can be set in Machine settings. : Press this to select Machine Setup MENU, or to switch to the previous screen. : Press this to switch to the next screen. : Use these to select a set…

75, MIMAKI SIJ-320UV 4-3 Chapter 4 Maintenance 4 2 Cleaning of pre-heater cover and after cover The pre-heater cover and the after cover are easy to be dirty because of the powder of the media etc. If it shows dirt, wipe it with a soft cloth soaked in water or waterish mild detergent and wrung. Cleaning the M…

29, This chapter describes procedures and setting methods for ink and media preparation, and printing. Workflow .......................................................2-2 Turning the Power ON/OFF ..........................2-3 Turning the Power ON ................................ 2-3 T…

64, 3-14 Setting the Display of Media Remain Whether the screen displays the remaining amount of a media is set. 1 Press the (MENU) in Local. 2 Press to select “Machine Setup”, and press the key. 3 Press to select “Media Remain”, and press the key. 4 Press …

115, 5-17 Chapter 5 Troubleshooting 1 2 2 2 5 SYSTEM HALT ERROR 716 InkHeater Tmp :1234 The ink heater is too hot. • Turn off the main power, and wait an hour or more before turning it back on. If control became impossible after the error was displayed, the following mes…