Nonin LS1 Operator's Manual

36, Nonin LS1 29 Using the LifeSense II Monitor Date/Time Screen This screen allows the operator to set the monitor’s date and time (24-hour clock). The date/time is used in the file name when downloading data. If the operator will not be downloading data, setting the date/time is not require…

61, 54 Technical Information Table 13. Guidance and Manufacturer’s Declaration—Electromagnetic Immunity Immunity Test IEC 60601 Test Level Compliance Level Electromagnetic Environment—Guidance This device is intended for use in the electromagnetic environment specified below. The user of…

18, 11 System Components Rechargeable Battery The monitor is designed to operate continuously when connected to a power outlet or for approximately 5 hours on a fully-charged battery. • A flashing yellow battery indicator (low battery) displays when the battery is almost depleted. This gives the…

65, 58 Technical Information Pulse Oximeter Specifications *This information is especially useful for clinicians performing photodynamic therapy. Capnography Specifications 1 There is no known adverse effect on performance due to cyclical pressure up to 10 kPa. 2 There is no degrada…

58, 51 Service, Support, and Warranty Service, Support, and Warranty A return authorization number is required before returning any product to Nonin. To obtain this return authorization number, contact Nonin Technical Service: Nonin Medical, Inc. 13700 1st Avenue North Plymouth, Minnesota 5544…

30, 23 Using the LifeSense II Monitor Monitoring a Patient 1. Verify the system has been set up (see System Setup). 2. Apply the Nonin-branded sensor to the patient. 3. Attach the sample line to the patient, as described in Applying the Sample Line, or refer to the individual sample line in…