Minolta CF5001 Operation & User’s Manual

118, Output Mode for Machine with Finisher (continued) 3-46 Secondary (Sub) Tray: 1 Face down non-sort exit outputs simplex copies and odd numbered duplex copies face down, without offsetting the sorted sets. 2 Face down group exit outputs multiple copies of each original face down, without offsetti…

24, Minolta CF5001 Caution Labels and Indicators (continued) 1-4 Inside the lower paper exit outlet is the roller drive unit. DO NOT put your hand into it; otherwise you may be injured. Use care after opening the paper exit outlet. DO NOT put your hand into it; otherwise you may be injured. (Finishe…

79, Positioning Originals (continued) 3-7 Positioning originals in Z-Folded original mode Z-Folded original mode detects the folded original size without using the size detection sensor of the RADF. • To use the Z-Folded original mode, see procedure on p. 9-8 to p. 9-9. • See p. …

26, 1-6 Requirements for Safe Use To ensure your safe use of the machine, the following describes the precautions you are required to observe without fail for the power source of the machine and during installation and routine handling. Be sure to read and observe them. Power Source CAUTION: Plug Sock…

115, Output Mode for Machine without Finisher (continued) 3-43 3. Touch OK on the Output Mode popup menu. The Basic Screen will be restored with the output icon indicating the Output mode currently selected. Touch CANCEL on the Output Mode popup menu to restore the previous setting. Touch RECALL …

75, Selecting Color Mode (continued) 3-3 FULL COLOR is already highlighted when the initial settings are restored. The initial settings may have been altered by Key Operator. See p. 14-10 for details. Selecting SINGLE COLOR will display the popup menu to specify a color. Touch the desired …