Mio MiVue M500 Operation & User’s Manual

8, 7 Setting the date and time To ensure the accuracy of recorded date and time, make sure to set the date and time before recording. 1. Make sure that the MicroSD card is inserted. 2. Open the protection cap. 3. Turn on your computer and the recorder. Connect the recorder to your computer. 4. T…

7, Mio MiVue M500 6 Charging the battery When charging the battery for the rst time, you should fully charge the battery. Connect your MiVue to the computer or another power source for charging. 1. Open the protection cap. 2. Connect the Micro-USB end of the USB cable to your recorder. Then se…

12, 11 System settings A system prole le will be generated automatically on the MicroSD card after the rst recording. You can set the advanced features using the "setting.txt" le. L The settings in the "setting.txt" le are for professional users only. If yo…

3, 2 Precautions and notices • Never attempt to disassemble, repair or make any modications to your recorder. Disassembly, modication or any attempt at repair could cause damage to the recorder and will void any warranty. • If you see or smell smoke from the recorder, stoppin…

4, 3 • Avoid spray on the device while the protection cap is loose or removed; otherwise, it may cause damage to the device. • Do not use the device with a wet hand while the protection cap is loose or removed. …

20, 19 WEEE This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point. …