Miranda Kaleido-X16 Operation & User’s Manual

160, 152 Configuring Alarms Managing Alarm Logging XEdit prompts you to confirm. 4Click Ye s to proceed. The selected virtual alarm is removed from your configuration. Managing Alarm Logging As part of the alarm calibration process, you can specify that an alarm, when triggered, be logged to an…

374, 366 Tally Interface Devices Kayenne Production Switcher Kayenne elements available from the filtered system tree, for assignment to alarm levels in the Sources table 7 If your logical sources include more alarm levels to be associated with the Kayenne switcher, then repeat step 5 …

164, Miranda Kaleido-X16 156 Configuring Alarms Publishing Alarms to SNMP Devices As part of the alarm calibration process, you can specify that the alarm, when triggered, be sent as an SNMP trap. To choose the traps that will be sent to the selected trap targets for this system 1 In the main window, click the S…

13, 5 Kaleido-X User’s Manual Kaleido-IP The Kaleido-IP can monitor and display HD and SD television programs distributed over IP, across two HDTV displays. It supports MPEG-2 and H.264/AVC compressed video, and the AAC, AC-3, MPEG-1, MPEG-2, MPEG-4 AAC LC, and MPEG-4 HE-AAC compressed audi…

340, 332 Routers & Kaleido-X Configuring a Multiviewer’s Internal Router 6 Select the physical levels you wish to add to KX Router’s first logical level, and then click OK. The selected levels appear in the Physical levels list. 7Click the [1] KX Router (96 × 80) folder under…

355, 347 Kaleido-X User’s Manual Setting Up a Multiviewer to Interface with a Sony Production Switcher To set up the multiviewer to interface with the Sony production switcher 1Open XEdit. 2 In the main window, click the System tab, and then click Description/Calibrations on the second-le…