Packard Bell Vibe 500 Disassembly Manual

3, 2 Packard Bell Vibe 500 Disassembly Manual Overview This document contains step-by-step disassembly instructions for the Vibe 500 MP3 player. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are remove…

10, Packard Bell Vibe 500 Packard Bell Vibe 500 Disassembly Manual 9 1. Remove the 2 screws in the metal bracket. Fig. 12 Location of screws in the metal bracket. 2. Pull up the metal and lift it from the bottom clip. Note The button panel only contains the <OK> and <C> buttons. All other but…

7, Packard Bell Vibe 500 Disassembly Manual 6 Fig. 6 Location LCD panel flat cable connector. 2. The LCD panel is glued to the metal bracket; use some force to separate the LCD panel from the main board. Removing the Main Board To remove the main board, open the player (see Opening the Casing ), re…

6, Packard Bell Vibe 500 Disassembly Manual 5 Removing the Battery To remove the internal battery, first open the casing (see Opening the Casing ) and then perform the following steps: 1. Disconnect the battery power cable from the main board Fig. 4 Disconnecting the battery power cable fro…

5, 4 Packard Bell Vibe 500 Disassembly Manual Opening the Casing To open the player, perform the following steps: 1. Remove the 2 screws in the side panels (one on each side). Fig. 1 Location of screws on side panel. 2. Insert a coin (or use a small flat- bladed screwdriver) into t…