Packard Bell DOTMA-111G16i Service Manual

80, 70 Chapter 3 Removing the Mainboard 1. See “Removing the Upper Cover” on page 51. 2. Open the locking latch and disconnect the LED Board FFC from the Mainboard. 3. Disconnect the Bluetooth cable from the Mainboard. 4. Open the locking latch and disconnect the Card Reader FFC from the M…

145, Chapter 4 135 POST Code Reference Tables These tables describe the POST codes and components of the POST process. Code Beeps POST Routine Description 02h Verify Real Mode 03h Disable Non-Maskable Interrupt (NMI) 04h Get CPU type 06h Initialize system hardware 08h Initialize chipset with initial …

142, 132 Chapter 4 c. Select the microphone type from the list and click Next. d. Follow the onscreen prompts to complete the test. 8. If the Issue is still not resolved, see “Online Support Information” on page 161. HDD Not Operating Correctly If the HDD does not operate correctly, perform the foll…

15, Chapter 1 5 Closed Front View Left View Right View 9 Power button/ indicator Turns the computer on and off while indicating the computer’s power status. No. Icon Item Description 1 Bluetooth communication switch Enables/disables the Bluetooth function. 2 3G/Wireless LAN communication …

57, Packard Bell DOTMA-111G16i Chapter 3 47 Main Unit Disassembly Process IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and replacement of components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. NOTE: The product pr…

5, V Preface Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Acer's "global" product offering. …