ALcom Concept Combo 2300 Operation & User’s Manual

13, 11 During a call press the MENU/OK button and the display will show “CALL MUTED”. To un-mute, press the MENU/OK button and the display will show “LINE IN USE”. During a call press the UP button to increase or DOWN button to decrease the Volume. The CC2300 corded base…

21, ALcom Concept Combo 2300 19 Ringer volume, melody Press the MENU/OK button. Scroll DOWN until you see “SETTINGS”. Then press the MENU/OK button. Scroll DOWN until you see “RING SETUP”. Press the MENU/OK button. Then it will display “ INT RING ” or scroll DOWN to select �…

20, 18 Enter name using keypad. Press the MENU/OK button to confirm the name. The display will move the flashing bar to the end of the number position. If the number needs modifying use the keypad to enter digits or Use the UP or DOWN buttons to scroll through the melodies. Press the M…

24, 22 During an external call it is possible to conference in another handset. During a call, press INTERCOM button and enter the number of the handset you want to connect to, by using the keypad. The display will show the handset name you have entered and the other handset will ring. If the num…

25, 23 Page / locate a handest Press the INTERCOM button. If you have only one cordless handset registered to the base, the display will show "CALLING HS1" and the base will beep. If you have more than one handset registered to the base, the display will show "HS?" …

32, 30 x You need to subscribe to the Caller Display feature from your network service provider. “The Caller Display feature isn’t working” x The caller may be calling from a network that does not “When I try to make a call, I hear Busy tone.” x If you’re using a…