Alcorn Mcbride Digital Binloop HD Operation & User’s Manual

42, Alcorn McBride Binloop User’s Manual Page 32 Get/Set Video Format Description: This command will get or set the current video mode. This command sets the A/V system to the appropriate frequency of 29.97 or 25 Hz. The reproducers will also receive the command to change the frequency…

48, Alcorn McBride Binloop User’s Manual Page 38 Mute/Unmute Video Description: This command controls muting on the video outputs of the Binloop. When muted, the video outputs are black. When unmuted, the video outputs display video normally. Command: naaaVD Parameters: n is a n…

118, Alcorn McBride Binloop User’s Manual Page 108 Your script should look like this. Now, the PlayClip sequence will be triggered when Button #1 on the front of the controller is pushed. Editing the PlayFile Sequence At this point, the PlayClip sequence is empty, so nothing …

73, Alcorn McBride Binloop User’s Manual Page 63 Timecode Trigger List The Timecode Trigger List is the portion of the Binloop software that allows you to program precisely timed commands that are triggered based on the Binloop’s timecode clock. It has a row of button at the top that all…

24, Alcorn Mcbride Digital Binloop HD Alcorn McBride Binloop User’s Manual Page 14 SMPTE Mode There are 3 basic modes that the SMPTE Interface can operate in. It can be configured to Read timecode, Generate timecode, or generate timecode in reference to the Binloop’s video clocks (Generate /w V- Sync). In Read…

117, Alcorn McBride Binloop User’s Manual Page 107 Creating a Sequence Next, let’s add a new sequence called PlayClip. Double-click on the empty cell just below the cell that contains Default. Type in the name PlayClip. Creating the Input Trigger We have now created a sequence that we wi…