Alcorn Mcbride 8TraXX/E Operation & User’s Manual

18, Page 16 March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6 Files can be referenced in commands by their full filename or their file number. The file number is determined by the 5-digit ‘nnnnn’ portion of the file name. The 8TraXX/E suppo…

42, Page 40 March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6 Play Toggle - PT Description: This command causes the 8TraXX/E to toggle playback of a file on the specified channel. If currently stopped, the file will play. If currently playing, the file…

16, Alcorn Mcbride 8TraXX/E Page 14 March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6 Firmware Recovery Mode (DIP 3, Unlabeled) This switch boots the 8TraXX/E in a recovery mode in which you can update the firmware. Use this mode to update to a working firmware version if a regula…

34, Page 32 March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6 All three of these settings can be configured remotely using the Command Protocol of the 8TraXX/E. Example: T:13:30 T:Sunrise T:Sunset D: Start Date The Start Date is the month, day, an…

41, March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6 Page 39 Play - PL Description: This command causes the 8TraXX/E to play a sound file to the specified channel pair or channel group. Command Bytes: <n><d><i>PL or “<filename&…

13, March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6 Page 11 LCD and Menu Knob The Menu Knob is used to navigate through an LCD menu in which you can configure your 8TraXX/E. Details of each of these parameters are explained in the sections that foll…