Mobi-click Carephone Operating Manual

10, 10 2 General information 2.3 Example of a key assignment: Red key 1: Call desired phone number 1 – help center, police ------------------------------------------------------------------------------------------------------ Yellow key 2: Call desired phone number 2, e.g. …

34, 34 7 Factory settings If your Carephone does not give messages, be it acoustically or optically, or other problems come up, you can reset the phone back to factory settings. This usually takes care of the problems. ■ Reset to factory settings With a thin object briefly pres…

23, 23 Hold down the ON/OFF key Wait for successful log-on to GSM net Check list: > SIM card installed? > Battery charged? > GSM net available? …

11, Mobi-click Carephone 11 3 Overview of your Carephone (picture 1) • Front side 5. Speaker 6. Battery indicator (green/yellow/red LED) 7. Key-guard and speakerphone key (double function) 1. Red key 1 (freely programmable) 10. Microphone 4. GSM net indicator (blue LED) 8.…

38, 38 8 Acoustical and optical messages ■ Incoming calls Optical signal Acoustical signal Explanation All keys flashing Ring tone Incoming call Red, yellow or green key blinking - One of the persons, whose phone number you have programmed on the respective ke…

25, 25 5 Making phone calls with your Carephone 1.Activate your Carephone 2. Hold down key 1, 2 or 3 until you hear beep; the respective key lights up 3.After approx. 5 seconds the connection is established and you can hear the dial tone 4. When your call is picked u…