Model Tech Simply Magic Manual, Instructions For Final Assembly

10, 10 Visit our website at http://modeltech.globalhobby.com or for Customer Service at http://globalservices.globalhobby.com ❑ Kwik Bond Thick C/A ❑ # 2 Phillips Head Screwdriver ❑ Excel Modeling Knife ❑ Electric Drill ❑ 11/64" & 15/64" Drill Bits YOU'LL NEED TH…

30, 30 Visit our website at http://modeltech.globalhobby.com or for Customer Service at http://globalservices.globalhobby.com ❑ # 1 Phillips Head Screwdriver ❑ Needle Nose Pliers ❑ Excel Modeling Knife ❑ Electric Drill YOU'LL NEED THE FOLLOWING PARTS FROM THE KIT: ❑ (2) 3-3/8"…

28, 28 Visit our website at http://modeltech.globalhobby.com or for Customer Service at http://globalservices.globalhobby.com ❑ Install the control horn and backplate using two M2 x 12 machine screws, being careful not to overtighten them. ❑ Repeat the previous procedures to install the…

37, 37 Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at [email protected] SECTION 25: FLYING THE SIMPLY MAGIC 40 The Simply Magic 40 ARF is designed for those pilots who are experienced at flying sport models. It is not a trainer. If you do n…

19, Model Tech Simply Magic 19 Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at [email protected] Step 2: Installing the Wheels and Wheel Pants ❑ Using a modeling knife, very carefully cut the wheel opening in each of the two wheel pants. ❑ Use 220 grit sandpaper with a san…

24, 24 Visit our website at http://modeltech.globalhobby.com or for Customer Service at http://globalservices.globalhobby.com ❑ Cut and install several pieces of foam rubber between the fuel tank and the fuselage sides to secure the fuel tank into place. When you install the hatch cover…