MUTOH ValueJet VJ-1204 User Maintenance And Cleaning Manual

2, MUTOH ValueJet VJ-1204 ATTENTION: This is a supplementary document and is to be used in conjunction with the ValueJet 1204 User Operations Manual. Please refer to Section 4: Daily Maintenance of the Quick Reference Guide or Section 6: Maintenance of the Operation Manual CD, for complete step by step instructi…

8, 4. To clean the area between the head an the guide ramps, position the carriage such that it is just off the right side of the platen. Work the swab under the head, being especially careful not to touch the nozzle surface area. …

6, 2. To clean behind the print head, position the foam swab parallel to the pressure roller and slide the swab behind the carriage. To clean either move the swab in a horizontal motion or move the carriage back and forth. …

5, ** Clean around Print Head CAUTION • When cleaning around Print Heads Do Not Touch the Bottom of the heads. Do Not Clean the Nozzle Surface with the cleaning device. Do not use water to clean the head. Nozzle clogging may occur Do Not Re-use dirty foam swabs or lint…

3, Section 3: Cleaning Procedures ** Clean Wiper Do not touch Wiper. Oil from your hands may prevent the wiper from cleaning the head properly. 1. The wiper can be cleaned using either the foam swabs or the lint free cloth. Either Eco- cleaning solution or Isopropyl Alcohol may b…