RME Audio Babyface Pro Operation & User’s Manual

34, 34 User's Guide Babyface Pro © RME 17. Mac OS X FAQ 17.1 MIDI doesn't work In some cases the applications do not show the MIDI port. The reason for this is usually visible within the Audio MIDI Setup – MIDI Window. It displays no RME MIDI device, or the device is …

37, User's Guide Babyface Pro © RME 37 20. Hotline – Troubleshooting The unit and drivers have been installed correctly, but playback does not work: • Is Babyface Pro listed in the System Profiler? (Vendor ID 2613). • Has Babyface Pro been selected as current playback device …

48, RME Audio Babyface Pro 48 User's Guide Babyface Pro © RME 21.4 Section Control Room In the section Control Room the menu Assign is used to define the Main Out which is used for listening in the studio. For this output the functions Dim, Recall, Mono, Talkback, External Input and Mute FX are automatica…

10, 10 User's Guide Babyface Pro © RME DIM Works on the hardware output defined as Main Output in TotalMix FX. Therefore the DIM LEDs will not be lit when stepping through the other two outputs. The applied attenuation is the one defined in TotalMix FX. DIM can also be used as…

88, 88 User's Guide Babyface Pro © RME While the setup is simplified (no panorama available) it is still very efficient and will address most needs. Also a different input can be mixed onto the same output. Of the eight ADAT channels only channels 1/2 can be controlled from th…