Risco ProSYS 16 Operation & User’s Manual

58, 58 ProSYS User's Manual Using a Proximity Tag When using a proximity tag, the following points regarding assigned partitions are relevant: ) If your user code is assigned to only one partition, then the partition will arm or disarm automatically. ) If your user code is assigned …

49, ProSYS User's Manual 49 10) UTIL OUTPUT S:02 01)OUTPUT 01 N Specify whether or not the first UO in the list should be automatically activated by using the key to enter one of the following characters at the end of the second line in the LCD: Y: Automatically activated. …

27, ProSYS User's Manual 27 ) For an LCD keypad: Y The Arm/ LED is flashing, and the display shows the disturbed zone. 3) Enter your user code and press / . If an alarm occurred, the Arm/ LED and the corresponding Zone LED will flash for the Alarm Memory period of about 60 s…

54, 54 ProSYS User's Manual When your required character is displayed, press / to move the cursor to the next field in the LCD, where you can enter the next character in the series. When you have finished entering a series of characters, ensure that the cursor is placed in the field af…

62, 62 ProSYS User's Manual Quick Key Function Description 4 Zone Status Allows the display of all system zones and their current status. 5 Event Log Allows the viewing of significant system events including date and time. 6 Service Info Allows the display of any previously ente…

65, Risco ProSYS 16 ProSYS User's Manual 65 Quick Key Function Description 5 User Settings Defines settings for users, including assigning PIN (Personal Identification Number) codes, assigning users to specific access groups, and deleting users. 6 Open Door Remotely opens any door fr…