RollSeal RS-500 Installation Manual

47, Part No 4801-5154 Rev 01-2017 RS-500/600 Series Doors Page 47 31 Cleaning Panels and Windows Panels and Windows can be cleaned using a solution of cold to warm, mild soapy water and a cloth. Wipe off the soiled area to remove dirt particles. Using a cloth gently wipe the pa…

38, Page 38 RS-500/600 Series Doors Part No 4801-5154 Rev 01-2017 23.3 Installation of Prewired Switches Cooler Switches are prewired with a CPC quick connect. Prewire Switches have two switch assemblies: an Outside Cooler Switch with a 6 foot harness and an Inside Cooler Switc…

51, Part No 4801-5154 Rev 01-2017 RS-500/600 Series Doors Page 51 35 Removing and Replacing Floating Magnets or Velcro NOTE: The door shown in the following illustrations may have different options and accessories than your door. Removing and replacing the floating is the same for…

20, RollSeal RS-500 Page 20 RS-500/600 Series Doors Part No 4801-5154 Rev 01-2017 13.5 Assembly of Tracks Taller doors that require a total track length over 13’ have spliced tracks. If track sections need to be assembled, follow the instructions shown below. 1. Arrange the Top and Bottom Tracks so …

56, Page 56 RS-500/600 Series Doors Part No 4801-5154 Rev 01-2017 36 RS-500/600 Series Door Wiring Diagram (Brother Motor Only) See Page 57 See Page 57 NOTE If your serial # comes after ‘0010156’, the wiring diagram changes from: Blue w/White Stripe changes from T8 &…

48, Page 48 RS-500/600 Series Doors Part No 4801-5154 Rev 01-2017 Diagram 32A Diagram 32B Diagram 32C 33 Emergency Egress (Optional Feature) The Emergency Egress feature provides a simple and convenient means of exiting a Roll Seal RS-500 Door from the inside of the structure should th…