Alliance Laundry Systems UL15F069 Installation & Operation Manual

13, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 11 1800001 Moving Finisher with Crane 1. Remove any obstacles under machine placement area. 2. Fasten lifting cables to lifting eyebolts. Refer to Figure 2. 3. Lift machine. 4. Make sure cable is positioned cor…

22, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance 1800001 20 Cleaning the Beds The life of all ironer clothing depends largely on the condition of the beds. A clean smooth bed increases the life of padding and improves the quality of the ironed linen. A typica…

12, Alliance Laundry Systems UL15F069 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 1800001 10 Pre-Installation Inspection Upon delivery, visually inspect the packaging and portions of the finisher that are visible through the packaging for shipping damage. If the package or finisher is damaged or…

9, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7 1800001 Installation Dimensions and Specifications UL15 Models UL20 Models UL15*069 UL15*079 UL15*099 UL15*118 Roll Motor *Optional High Speed .24 hp (.37 kW) *.5 hp *(.37 kW) .24 hp (.37 kW) *.5 hp *(.37 kW) .5 hp (…

23, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance 21 1800001 3. Tie the leading edge of the felt to the springs every 12 inches (300 mm) using wire. These must remain until clothing is stitched, then they should be cut and removed. 4. Repeat the procedure t…