PCE Instruments PCE-TC 9 Manual 

12, Manual 12 4.12 Display description All objects can be chosen by using the hot key 2. The chosen object will flash yellow. If no action has been taken after two seconds, the hot key mode will be ended automatically. 1. Auto focus: Press hot key 1 to activate auto focus. 2. Area measurement…

6, Manual 6 Environmental conditions of the thermal camera Operating temperature range -20 ... +50 °C Storage temperature range -40 ... +70 °C Protection class (case) IP 50 Humidity <90 % Shock 25 G, IEC60068-2-29 Vibration 2 G, IEC60068-2-6 Physica…

16, Manual 16 4.14.5 Delete Enter the submenu “Delete” to get a dialogue box. Choose “OK” and press the Enter key to confirm the deletion. Press and hold the Enter key to leave the preview mode. 4.14.6 Format This function will format the internal storage or the S…

7, Manual 7 4 System description The thermal camera makes good thermal pictures and allows determination of temperatures so that it can be used in multiple areas and industries. The efficiency in industrial fields can also be optimised by using this camera. 4.1 Battery and char…

19, PCE Instruments PCE-TC 9 Manual 19 4.15.3.2 Vertical line measurement The vertical line is a scan line for the temperature. In the upper right corner the current temperature value of the vertical line in intersection with the cursor line is displayed. After pressing hot key 2, you will get to line mea…

23, Manual 23 4.16.1.1 Alarm Switch Pressing ˂ or ˃ switches the alarm function on or off. In case the alarm is switched on and the temperature is above the alarm temperature, there will be a signal and the location of the high temperature will be marked in the alarm colour (if…