PCI EFP-500 Instruction Manual

16, EFP-500 M0001-006 07/26/2011 - 16 - 2. Connect the Main Channel Assembly and Special Channel Assembly to the quick- disconnects on the EFP-500. Place these assemblies into the container with the high- level disinfectant. 3. Push the Detergent start button. Allow the unit …

11, EFP-500 M0001-006 07/26/2011 - 11 - 6. Push the power switch on the right side of the EFP-500 to activate the unit. The switch will illuminate when the device is on. You are now ready to flush your endoscope with the EFP-500. NOTE: If problems occur when inserti…

5, EFP-500 M0001-006 07/26/2011 - 5 - 2 Important Information Please Read Before Use Product Overview The Endoscope Flushing Pump (EFP-500) is a compact unit that contains a single pump. It is used to replace the manually operated syringe for flushing detergent, rinse…

14, EFP-500 M0001-006 07/26/2011 - 14 - 5 Routine Maintenance Daily Maintenance Daily Cleaning: refer to Section 6 Decontamination: refer to Section 7A Flow Verification: refer to Section 8 Monthly Maintenance Decontamination: refer to Section 7B 6 System Mainten…

8, PCI EFP-500 EFP-500 M0001-006 07/26/2011 - 8 - Wall Mounting your EFP-500 Your EFP-500 can be placed on a countertop or can be wall-mounted. (Tools needed: #2 Phillips head screwdriver, pencil and electric drill) 1. There must be a minimum of 4” of clearance on the right side of th…