Performax 241-0502 Owner's Manual

20, 20 INSTALLING DRILL BITS – cont’d 1. To open the keyless drill chuck, grasp and hold the chuck body (1) and rotate it in a counter-clockwise direction until the chuck jaws (2) open wide enough to accept the bit (3) (Fig. 12). NOTE: The drill spindle …

15, 15 CHARGER LED FUNCTIONS (Fig. 3) Power ON The green LED will stay ON when the charger is plugged into a ”live” power source. Battery partially charged The red LED will flash during charging. Battery fully charged When the battery is approximately 100% charged, t…

9, 9 WARNING: Only use the diagnostic charger supplied with this kit to charge the 12 V Li-ion battery. Charging any other batteries may damage the charger and possibly cause serious injury. Do not store or carry the battery in a manner in which metal objects could c…

2, 2 Product specifications ………….……………………………………………………. 1 Table of contents ……………………………………………………………………... 2 General safety warnings ………………………………………………

22, 22 DRILLING When drilling into smooth, hard surfaces such as metal, use a centre punch to mark the desired hole location. This will prevent the drill bit from slipping off centre as the hole is started. The work…

5, Performax 241-0502 5 WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. Work area safety Keep work area clean …