Allied Telesis AT-2712FX Installation And User Manual

34, Enabling Vista IPSec 34 Introduction Traditionally, IPSec has been used for remote connections, but this feature has moved into the Local Area Network (LAN) to secure local network traffic against eavesdropping. Vista’s Next Generation TCP/IP stack provides APIs for accessing …

4, 4 Translated Safety Statements Important: The  indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” (613-000990) posted on the Allied Telesis website at www.alliedtelesis.com and on this product CD. …

68, Enabling LINUX 68 Note The force option may be needed on some Linux distributions if conflicts are reported. Depending on the kernel, the driver is installed in one of the following directories: 2.4.x kernels: /lib/modules/<kernel_version>/kernel/drivers/net/ tg3.o 2.6.x k…

24, Allied Telesis AT-2712FX Chapter 2: Installing the Hardware 24 Pre-Installation Checklist Before you install an adapter card, check the following list: 1. Verify that your system is using the latest BIOS. Note If you acquired the adapter software from the Allied Telesis support website, enter the path t…

42, Enabling Vista IPSec 42 Figure 19. Administrative Tools Window 10. From the Administrative Tools window, select Computer Management. See the Computer Management window in Figure 20. Figure 20. Computer Management Window …

45, 45 Chapter 4 Installing Windows Server 2003 and Windows XP Driver Software This chapter describes how to install the Windows 2003 and Windows XP driver software in the AT-2712FX/SC and AT-2912T adapters. It contains the following sections:  “Installing the Driver Software” on page 4…