Allied Telesis AT-2812FX Installation And User Manual

73, AT-2812FX ExpressCard Fast Ethernet Fiber (SC) Module Installation and User’s Guide 73 5. Click OK. 6. If prompted to restart your computer, click Yes. Although it is not necessary to reboot the system for new adapter properties to take effect, rebooting is recommended to reinitialize…

58, Chapter 5: Installing the Windows 7 Driver Software 58 3. On the Device Manager Window, right click Ethernet Controller and select Update Driver Software. See Figure 27. Figure 27. Device Manager Window: Ethernet Controller The Update Driver Software - Ethernet Controller Window is…

18, Chapter 1: Introducing the AT-2812FX Module 18 Hardware Features The following list of hardware features for the AT-2812FX module applies to all of the supported operating systems:  One 100BASE-FX port with SC multi-mode fiber connector  Full and half duplex Media Access Control …

3, Allied Telesis AT-2812FX 3 Electrical Safety and Emissions Standards This product meets the following standards. RFI Emissions FCC Class B, EN55022 Class B, VCCI Class B, C-TICK, CE Immunity EN55024 Electrical Safety EN60950 (TUV), UL 60950-1 ( C UL US ) U.S. Federal Communications Commission Declaration of Conformit…

31, 31 Chapter 3 Installing the Vista Driver Software This chapter describes how to install and update the Vista driver software for the AT-2812FX module. The installation procedure is identical for the both the Vista 32-bit and 64-bit operating systems. This chapter contains the following s…

49, AT-2812FX ExpressCard Fast Ethernet Fiber (SC) Module Installation and User’s Guide 49 Figure 20. Device Manager Window Updating the Windows XP Driver Software To update the adapter software on a Windows XP Operating System, do the following: 1. Start a Windows XP system and log …