Pfaff 1051 Instruction Manual

28, Pfaff 1051 Preparation 9 - 2 ● Place an empty bobbin 1 onto bobbin shaft 2. ● Thread the bobbin in accordance with Fig. 9-02 and wind it anti-clockwise around bobbin 1 a few times. ● Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2 and lever 3. The bobbin fills up duri…

31, Care and maintenance 10 - 1 10 Care and maintenance Clean............................................................. daily, more often if in continuous operation Check oil level....................................yearly ▲ , only on the PFAFF 1181 and PFAFF 1183 ▲ These maintenance interv…

5, Contents Contents ...............................................................................Chapter - Page 11.06.03 Knife height..............................................................................................................11-26 11.06.04 Knife position in sewing dir…

59, Adjustment 11 - 27 ● Adjust knife bracket 1 (screw 2) according to the requirement. 11.06.04 Knife position in sewing direction Requirement When the needle is at its b.d.c., the centre of the knife blade should be positioned at "needle centre". 1 2 Fig. 11 - 26 …

16, Controls 7 - 1 7.02 Keys on the machine head ● The following functions are triggered by pressing the respective key. Key 1: reverse sewing Key 2: prevention or release of the automatic start back tack or finish back tack. Key 3: when sewing is interrupted, the needle can either be raised…

34, Adjustment 11 - 2 11.04 Checking and adjusting aids With the aid of blocking pin 1 (part No. 13-033346-05) and if necessary adjustment gauge 3 (part No. 61-111 639-70) the machine can be blocked in the following positions for adjustment Fig. 11 - 01 1 2 4 5 3 Needle bar position 1.8 mm …