Pfaff Element 1050 series Supplement To Instruction Manual

9, Sewing 4 - 1 4 Sewing 4.01 Sewing with bobbin thread monitoring The bobbin thread monitoring function is activated, when parameter "660" is set at value "1". The number of stitches remaining after the bobbin thread monitor has reacted is entered under parameter "760&q…

17, Pfaff Element 1050 series 6 - 2 Parts list 95-774 525-91 (PFAFF 1051;1181) 11-210 084-25 (2x) 95-774 524-91 (PFAFF 1053;1183) 11-210 084-25 (2x) 95-774 407-91 91-004 181-05 91-262 806-05 95-774 409-25 91-100 076-15 (2x) 91-000 621-15 (2x) 95-784 334-91 95-774 361-05 95-774 408-91 95-774 419-25 95-784 334-91 …

7, Preparation 3 - 1 3 Preparation All regulations and instructions in this Instruction Manual are to be observed! Special attention is to be paid to the safety regulations! All preparation work is only to be carried out by appropriately trained personnel. Before all preparation work, the …

8, Preparation 3 - 2 3.02 Inserting the bobbin case / Adjusting the bobbin thread tension Fig. 3 - 03 5 cm 1 + - ● Insert bobbin 1 into the bobbin case 2 as shown in Fig. 3-02. ● Place the bobbin in the bobbin case. ● Pass the thread through the slot under the spring as shown in Fig. 3-03. When…

11, Adjustment 5 - 1 5 Adjustment 5.01 Notes on adjustment All adjustments in this instruction manual apply to a completely assembled machine and may only be carried out by suitably trained staff. Machines covers which are removed for control and adjustment work and then set back in place a…