Pfaff 467 Instruction Book And Service Manual

3, Pfaff 467 Foreword This instruction book contains much valuable information about the Pfaff 467 high-speed sewing machine. Though not intended as a full-scale textbook capable of answering all questions related to sewing exhaustively, it offers sufficient information on the construction, functi…

9, z Fig. 7 R 5870 7. Threading the Bobbin Insert a full bobbin Into the bobbin case so that the thread draws on the top from the left toward the right (Fig. 5). Hold the bobbin firmly in the bobbin case, pull the thread into the slot (Fig. 6) and draw it under the tension spring and into the …

50, Never rinse one of these new high-speed seamers with kerosene or gasoline. If the front end of the machine should be too dirty and must be cleaned with kerosene, be careful that the kerosene does not come in touch with the sealed bearings. Before you clean this part of the machine, remov…

33, 24. Timing the Mechanical Opener Accurate setting of the bobbin case opener seems to present a problem to many mechanics so that they prefer to render it inoperative rather than go to the trouble of adjusting it. Before you tackle this adjustment, it is imperative that you revert to Chapter 23 a…

5, Model Needle Hole Die. in mm Max. Stitch Length in s.p.m. Needle Size in '/loo mm Machine Speed In r.p.m. Motor Order No. Pulley DIa. In mm Needle System A (1.0) 1.0 5)4 60 4,200 16-437 080-55 95 134 A Standard 1.2 5)4 70 4,200 16-437 080-55 95 134 A (1.4) 1.4 5)4 80 4,200 16-437 080-55 9…

55, Improper Feeding 1. Feed dog and vibrating presser set improperly. 2. Feed dog tooth pattern too fine for material processed. 3. Type of feed dog unfit for material processed. 4. Insufficient amount of pressure exerted by presser foot. 5. Lint accumulated between teeth of feed dog. 6. Points o…