Allied Telesis AR700 SERIES Hardware Reference Manual

22, Allied Telesis AR700 SERIES 22 AR700 Series Router C613-03087-00 Rev E Safety Safety information and instructions outlining how to use an AT-PWR03 AC or DC power supply can be found in the AR750S-DP Router Installation and Safety Guide. Read these instructions before attempting to install, remove or power an AT…

23, Hardware Reference 23 C613-03087-00 Rev E AR750S-DP LEDs and what they mean Functions of the AR750S-DP LEDs are shown in the following table. Additional LEDs may be present if a PIC is installed. Functions of PIC LEDs are described in the Port Interface Card Hardware Reference. LED Sta…

39, Hardware Reference 39 C613-03087-00 Rev E Battery-Backed RAM (AR725, AR745, AR770S only) The AR725 and AR745 have 128 kB of battery-backed SRAM as NVS (non- volatile storage), and the AR770S has 512 kB. The router can store files such as logs and configuration scripts in NVS over a…

10, 10 AR700 Series Router C613-03087-00 Rev E AR725 LEDs and what they mean Functions of the AR725’s LEDs are shown in the following table. Additional rear panel LEDs may be present if a PIC or NSM is installed. Functions of PIC and NSM LEDs are described in their respective Hardware References…

49, Hardware Reference 49 C613-03087-00 Rev E opportunity at finding non-random data, compression occurs before encryption, in the order: compression → encryption →//→ decryption → decompression Adding compression to an encrypted link increases line throughput. Once compression has …

61, Hardware Reference 61 C613-03087-00 Rev E 3. Enable diagnostics mode during start-up. During the router start-up process, at the prompt: Force EPROM download (Y)? press [Ctrl/D] on the terminal to enter diagnostics mode. A banner page is displayed on the terminal (Figure 35). Thi…