Allied Telesis 86253-07 Manual, Release Note

23, Patch 86253-07 For Rapier Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 23 Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E An anycast address could not be assigned when the prefix for the anycast address had previously been assigned on that interface. This issue has b…

6, 6 Patch Release Note Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E Features in 86253-05 Patch file details are listed in Table 2: Patch 86253-05 includes all issues resolved and enhancements released in previous patches for Software Release 2.5.3, and the followin…

29, Patch 86253-07 For Rapier Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 29 Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E If ALL is specified, all configurable ICMP message replies are disabled. If NETUNREACH is specified, all network unreachable message replies are disabled (R…

27, Patch 86253-07 For Rapier Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 27 Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E The IP multicast counter did not increment when IGMP, DVMRP and PIM packets were transmitted and received. This issue has been resolved. The firewall denied…

5, Allied Telesis 86253-07 Patch 86253-07 For Rapier Series Switches 5 Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E Entering “?” after a command at the CLI gives context-sensitive Help about parameters valid for the command. Occasionally, commands (for example, ENABLE IP MULTICASTING) wer…

21, Patch 86253-07 For Rapier Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 21 Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E The switch was adding a router port for multicast packets to destinations with an address in the range 224.0.0.x. Switch port entries are now only created fo…