AllTrade #540025 Instruction Manual

9, AllTrade #540025 IT MAY BE NECESSARY TO BRACE OR SUPPORT ONE END OF THE AIR COMPRESSOR WHEN ATTACHING THE WHEELS AND THE RUBBER FEET, BECAUSE THE AIR COMPRESSOR WILL HAVE A TENDENCY TO TIP. Installing Wheels: The wheels must be installed prior to operating the compressor. 1. Insert supplied wheel bolt through hole …

19, 19 No. Parts No. / No. de Réf DESCRIPTION / DESIGNATION / DESCRIPCIÓN Qty. / Qté No. de Parte Ctdad. 40 30011414 Manifold Collecteur Múltiple 1 41 203314B Nipple Jauge de pression de sortie Niple 1 42 30051414N2 Pressure Regulator Détendeur Regulador de presión 1 43 30031512LN O…

16, 16 Problem Encountered Possible Cause Possible Solution Insufficient pressure at air tool or air accessory: Air compressor not making enough air: Excessive oil consumption: Oil has milky appearance: Moisture in discharge air: Pressure regulator knob is not turned to high enough pressur…

4, Protect your eyes. The operation of any air compressor can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear eye protection that meets ANSI Z28.1 specifications during air compressor operation. Eyeglasses are not always safety g…

11, TOO MUCH AIR PRESSURE CAUSES A HAZARDOUS RISK OF BURSTING. CHECK THE MANUFACTURER'S MAXIMUM PRESSURE RATING FOR AIR TOOLS AND ACCESSORIES. THE REGULATOR OUTLET PRESSURE MUST NEVER EXCEED THE MAXIMUM PRES- SURE RATING. 7. Before connecting the compressor to the grounded outle…