SEM 0300 Operational Manual

10, 10 For NATIONWIDE SERVICE Call 1(800)225-9293 | SEM ‐ Security Engineered Machi nery Startup and Operation Please read this section carefully. Most problems occur during the first hours of operation. These can be eliminated by careful review of the operating, maintenance and recom…

22, 22 For NATIONWIDE SERVICE Call 1(800)225-9293 | SEM ‐ Security Engineered Machi nery CUTTING HEAD BILL OF MATERIALS ITEM PART NO. DESCRIPTION QTY. 1 33771 LOWER UPRIGHT SIDE PLATE 2 2 33626 3" X 3" X 1/4" < ‐ 18" 2 3 33772 UPPER U…

17, 17 For NATIONWIDE SERVICE Call 1(800)225-9293 | SEM ‐ Security Engineered Machi nery Troubleshooting Continued PROBLEM POSSIBLE CAUSE REMEDY Machine will not run in forward or reverse. (continued) 8) Stop button stuck “in”. 9) Loose wire in p…

4, 4 For NATIONWIDE SERVICE Call 1(800)225-9293 | SEM ‐ Security Engineered Machi nery General Assembly Drawing Shredder Cabinet Collection Bin Access Door Drop Chute Control Panel Top cover …

12, SEM 0300 12 For NATIONWIDE SERVICE Call 1(800)225-9293 | SEM ‐ Security Engineered Machi nery Important Feeding Information Continued 3) If shredder jams, unit will automatically reverse up to five times. If jam is not “automatically’ cleared, the system will shut down and the red RESET pu…

13, 13 For NATIONWIDE SERVICE Call 1(800)225-9293 | SEM ‐ Security Engineered Machi nery Material Tested 1” Hard Drives: 1 per feed approximately every 20 seconds Notebook Drive: 3 per feed approximately every 20 seconds DLT Tapes 1 per feed approximately every 20 second…