Shindaiwa DGW200MS/UK Operator's Manual

20, Shindaiwa DGW200MS/UK - 19 - 8-3. Connection – Welding Cable Danger: Electric Shock  Before connecting or disconnecting a welding cable from welding output terminals, stop the engine, and remove the engine key. The person performing this task should always keep the key. ① …

23, - 22 - 9-1. Operation Danger: Electric Shock  Before connecting or disconnecting a load cable from the receptacles, always turn the circuit breakers (MAIN CB, 15A, 30A) to [OFF] position. And always stop engine, and remove the engine key. The person performing the maintenance shou…

11, - 10 - (3) Coolant/Water Temperature Monitor Lamp Danger: Injuries  Close and lock all doors during operation of this equipment, to avoid injuries by unintentionally touching cooling fan and fan belt. Caution: Burns  Do not open the radiator cap while operating this equipment or …

3, - 2 - 1. Safety Guidelines Danger: Suffocation from exhaust fumes  Exhaust fumes from the engine contain many elements harmful to humans. Do not operate this equipment in poorly ventilated areas, such as inside a room or in a tunnel. Danger: Electric Shock  Close and …

31, - 30 - 12. Long-Term Storage Danger: Electric Shock  Before performing any equipment check or maintenance, stop the engine, and remove the engine key. The person performing the maintenance must always keep the key. Caution: Injuries  Before performing any equipment check…

18, - 17 - Restart after stopping due to fuel shortage This equipment is equipped with a self bleeding system. Therefore, even though the engine stops due to low fuel, you can restart the engine easily by the following steps. ① Turn the starter switch to STOP. ② Fill the fuel. ③ Turn …