Suzuki 45100-05810-FC8 Installation Instructions Manual

1, R GENUINE SUZUKI ACCESSORIES 1/6 Ref. Description (1) Plier (2) Driver + (3) Spanner (4) Drill machine (5) Hexagon Wrench Ref. Description QTY A Seat 1 B Subwire 1 C Joint 2 D Switch 1 Contents I N S T A L L A T I O N I N S T R U C T I O N S Description: SEAT HEATER Part Number: 4510…

2, R GENUINE SUZUKI ACCESSORIES 2/6 1. Check that the kit includes all the parts listed in the first page. 2. Check each part in the kit for scratches or any form of damage. 3. Park the vehicle on a level ground. 4. Remove the ignition key from the switch and store it in a safe place. 5.…

3, R GENUINE SUZUKI ACCESSORIES 3/6 Installation INSTALLING PROCEDURE 1. Remove the front frame cover and the leg center cover L. 2. Remove the pin, the nuts and the seat. 3. Remove the trunk lamp and in- stall it to the new seat. 4. Remove the front leg shield cover, the front leg shield, win- dow sc…

4, R GENUINE SUZUKI ACCESSORIES 4/6 5. Remove the screw and the clips, then remove the parking lever, the handle upper cover, the handle lower cover, the front panel and the meter cover. 6. Open a hole 30 × 26 on the meter cover. NOTE: • A paper pattern 30 × 26 is given attach…

5, Suzuki 45100-05810-FC8 R GENUINE SUZUKI ACCESSORIES 5/6 9. Connect the lead wire and subwire connector. 10. Joint the two subwires, then com- bine them with the main harness. 12. Install the seat and mount the connector of trunk lamp and seat heater. 13. Set the main switch ON and de- press the seat heater switch. An…

6, R GENUINE SUZUKI ACCESSORIES 6/6 WARNING ! CAUTION CAUTION FOR HANDLING • Do not use continuously for a long time. You will run the risk of getting low-temperature burn, if one part of your body is constantly in touch for a long time, even though it is relatively low temperature, without…