Tripy 2 Operation & User’s Manual

81, Tripy 2 81 the delete key on the virtual keyboard and press the “OK” knob as many times as necessary to delete one or several letters. Once the name completed, you may select the “Validate” key on the virtual keyboard and press “OK”. On the recorder screen, you find to the ri…

87, 87 At the top of the screen, you will find the date and time as well as your latitude/longitude. These infor- mation are only correct when the GPS receiver is correctly synchronized. To be confident that the time displayed is accurate down to the second, you shall wait for a at l…

33, 33 Connecting to the vehicle power cable3.6. Despite the fact that Tripy II’s batteries allow about 15 h of usage without re-charging, it is however possible to connect Tripy II to the vehicle power supply. To implement such connection, you shall exclu- sively use the Tripy cable R…

8, 8 Tripy II concepts2. Preliminary2.1. The Tripy II GPS is a stand alone navigation system allowing the computation of an A-to-B itinerary and displaying the itinerary in a traditional fashion as a scrolling map on its screen. Nothing revolutionary, and pretty common to all GPS’es on th…

21, 21 Tripy II shows seven watertight knobs at the front for the following functions:  •ON/OFF: When Tripy II is Off, a short pressure on this knob switches the device On. When Tripy II is On, a long pressure on this knob switches the device Off. When Tripy II is On, e…

27, 27 Connecting to the battery chargera. This connection is used to recharge the Tripy II batteries. See paragraph « 3.5 Handling the batte- ries ». Permanent connection to the vehicle power supplyb. Before riding with Tripy II connected to the cable Ref. 9020, it is compulsory to screw …