SitePro 26-DT05 Operating Instructions Manual

13, 12 6. Recollimate the first target A using the horizontal tangent screw and motion clamp. N - 1 T2 HA R 0 ° 00 ′ 00 ″ 11-03-20 15:48 RE P SF T 【 】, and ° 00 ′ 00 ″ 7. Press make the horizontal angle of A is OSET 0 N - 1 T…

3, Catalogue 1. Nomenclature 2. Display and display mark 3. Operating keyboard and operating key 4. Preparative before measurement 4.1 Leveling the instruement. 4.2 Power switch on 4.3 Battery power display 4.4 Charge the battery 5. Angle measurement 5.1 Measuring a HA and v…

6, OSET HOLD SFT R/L REP S/H/VDIST REC V / % 3. Operating keyboard and operating key Keys Function 1 Function 2 OSET set horizontal angle 0 distance measurement HOLD R/L V% hold the horizontal angle repeat measurement horizontal ang…

24, Check a. Set the instrument on the tripod and level it carefully. b. Sight the cross-hair on a well-defined point A on the wall at a distance of at least 50 meters(160ft). c. Next swing the telescope and check whether the point travels along the length of the vertical c…

7, 4.1.1. Place the tripod First, put the tripod leg in the proper position and tighten the locking screws. 4.1.2. Attaching the instrument to the tripod head Place the instrument carefully on the tripod head, and move the instrument slowly by loosening adjusting screw. Align the plumb …

10, SitePro 26-DT05 5. Angle measurement 5.1 Measuring a HA R and vertical angle 1. Collimate the first target. 2. Press 【 】 0 ° 00′ 00 ″ VA 90 ° 00 ′ 00 ″ HA R 0 ° 00 ′ 00 ″ VA 90 ° 00 ′ 00 ″ 0 ° 1…