Unitron Shine Rev M BTE Operation & User’s Manual

23, Unitron Shine Rev M BTE 38 39 Replacing the battery 1. Gently swing out the battery door with your ngernail. 2. Grasp the battery with your thumb and index nger and remove. 3. Insert the new battery into the battery compartment with the plus (+) sign on the battery facing the same way as the plus …

21, 34 35 Putting your ITE hearing aids inyourears Your hearing aids may be color-coded either on the shell or on a label on the hearing aid: red=right ear; blue = le ear. Inserting your hearing aid 1. Hold the hearing aid between your thumb and index nger with t…

8, 8 9 Your BTE hearing aids at a glance 1 Earhook - your custom made earmold attaches to your hearing aids using the earhook 2 Microphone - sound enters your hearing aids through the microphones. Microphone shield - protects microphones from dirt & debris 3 Push button…

11, 14 15 BTE battery information To replace the battery, fully open the battery door for access to the battery compartment. Low battery warning Two long beeps indicate the hearing aid battery is low. Aer the low battery warning, sounds may not be as clear. This is normal and c…

22, 36 37 Turning your ITE hearing aids onando Your hearing aids have a battery door that acts as an on/o switch and that allows access to the battery compartment. 1. On: Close the battery door fully. Note: It may take 5 seconds before the hearing aid turns on. Your hearing hea…