Xerox Phaser 3121 Manual 

126, Xerox Phaser 3121 A PPENDIX 7.11 7 3 The LLPR Properties window opens. You will see the following six tabs at the top of the window: • General - allows you to change the paper size, the paper type, the paper source, the orientation of the documents, enable duplex feature, add start and end ban…

119, A PPENDIX 7.4 6 The printer driver installation begins. When the installation is completed, click Start. 7 The Linux Printer Configuration window opens. Click the Add Printer icon on the toolbar at the top of the window. Note: Depending on the printing system in use, the Administrator Login …

77, P RINTING T ASKS 4.22 Printing Overlays What is an Overlay? An overlay is text and/or images stored in the computer hard disk drive(HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead …

50, U SING P RINT M ATERIALS 3.13 3 3 When you print on labels, you must select Manual Feed for Source from the software application, and then select the correct paper size and type. For details, see page 4.6. Note: Please be careful when you open the rear cover. The inside of the printer maybe…

87, M AINTAINING Y OUR P RINTER 5.2 Maintaining the Toner Cartridge Toner cartridge storage To get the maximum results from the toner cartridge, keep the following guidelines in mind. • Do not remove the toner cartridge from its package until ready for use. • Do not refill the toner ca…

63, P RINTING T ASKS 4.8 Using the Toner Save Mode Toner Save mode allows the printer to use less toner on each page. Selecting this option will extend the life of your toner cartridge and reduce your cost per page, but will reduce print quality. There are two ways to enable the…