Xilinx AC701 Operation & User’s Manual

23, AC701 Evaluation Board www.xilinx.com 23 UG952 (v1.3) April 7, 2015 Feature Descriptions The JTAG connectivity on the AC701 board allows a host computer to download bitstreams to the FPGA using Xilinx software tools. In addition, the JTAG connector allows debug tools or a softwa…

47, AC701 Evaluation Board www.xilinx.com 47 UG952 (v1.3) April 7, 2015 Feature Descriptions The character display runs at 5.0V and is connected to the FPGA 3.3V HP bank 14 through a TI TXS0108E 8-bit bidirectional voltage level translator (U45). Figure 1-27 shows the LCD interface cir…

38, 38 www.xilinx.com AC701 Evaluation Board UG952 (v1.3) April 7, 2015 Chapter 1: AC701 Evaluation Board Features SFP/SFP+ Connector [Figure 1-2, callout 13] The AC701 board contains a small form-factor pluggable (SFP+) connector and cage assembly (P3) that accepts SFP or SFP+ module…

40, Xilinx AC701 40 www.xilinx.com AC701 Evaluation Board UG952 (v1.3) April 7, 2015 Chapter 1: AC701 Evaluation Board Features 10/100/1000 Mb/s Tri-Speed Ethernet PHY [Figure 1-2, callout 14] The AC701 board uses the Marvell Alaska PHY device (88E1116R) at U12 for Ethernet communications at 10 Mb/s, 100 Mb/…

87, AC701 Board XDC File Listing AC701 Evaluation Board www.xilinx.com 87 UG952 (v1.3) April 7, 2015 set_property PACKAGE_PIN B1 [get_ports DDR3_DQS4_N] set_property IOSTANDARD DIFF_SSTL15 [get_ports DDR3_DQS4_N] set_property PACKAGE_PIN V3 [get_ports DDR3_DQS3_P] set_property…

77, AC701 Evaluation Board www.xilinx.com 77 UG952 (v1.3) April 7, 2015 Configuration Options Configuration Options The FPGA on the AC701 board can be configured using these methods: • Master SPI flash memory (uses the Quad SPI flash memory U7). • JTAG (uses the U26 Digilent USB-to-JTAG b…