XTZ Divine 100.49 Operation & User’s Manual

7, 7 (16) Practice of sound / Installation and placement tips This chapter contains general information about loudspeaker placement and installation. These are general rules, so there are exceptions in some cases. In which room do you achieve the b…

5, 5 (16) Midrange driver Thiel & Partner, also called Accuton, is one of the most famous manufactures of loudspeaker drivers. XTZ Divine 100.49 uses T&P C173N-T6-90, one of the best (if not the best) midrange driver in the world and can only be found in extrem…

14, 14 (16) Basic setting for neutral bass reproduction Since the acoustics is determined by a wide range of external factors there exists no single neutral setting that will work properly for all cases. External factors that have influence on the sound include…

13, 13 (16) Sound settings Room Tuning - Mechanical adjustment of the boundary frequency By using the supplied bass plugs in the bass reflex gates, you can alter the lower boundary frequency of XTZ Divine 100.49. The bass level can be adjusted in 3 different…

12, XTZ Divine 100.49 12 (16) Connecting Active drive When using active drive, make sure that the active cross over has the correct settings before connecting to XTZ Divine 100.49. A broken driver due to incorrect connection is not covered by warranty! It is important that the connect…

11, 11 (16) TRI-AMPING When tri-amping, all the metal plates between the terminal screws should be removed. See drawing below. Links/Jumpers for Active/Passive drive To change between passive and active drive, just remove the links/jumpers. When the jumpers are remov…