Wonwoo Rapport-10HD/PRO Operation & User’s Manual

8, 2 Basic functions 2.1 Power On / Off Switch on the power button in the side of product and press “PWR” button for 3 seconds to turn on the power. ※ The discharge starts when the main switch is turned on and it start to consume power from the battery. Therefore, when the product is n…

18, 3.2.5.2 Low Battery If below message is shown, please charging the battery. 1. Select as below to set factory reset. OSD Menu SYSTEM → Factory -> YES [ Low Battery warnning ] Restore setting values to the factory default. All existing setting value will be erased. 3.2.5.3 …

2, Safety information 1 Preduct introduction 1.1 Standard items 1.2 Part name & Functions 1.2.1 Front 1.2.2 Top side 1.2.3 Back & side 1.3 Operation 1.3.1 Operating button 1.4 Product specifiations 1.4.1 Electrical Specifications 1.4.2 Dimension 1.5 Battery c…

14, 3. When update is completed, below window is shown and the power will be off when press “OK” button. Turn on the power by pressing “POWER” button to restart. [ F/W update completed ] 4. Below screen is shown when there is no firmware files. - Check the SD card and USB connecting. - After…

7, Wonwoo Rapport-10HD/PRO FUNCTIONS 1.4.2 Dimension * 266(W) x 176(H) x 38(D) Unit : mm 266 176 38 266 1.5 Battery charging 1.5.1 Battery charging by DC power This product can be charged by using DC adaptor which is provided in the box and connect it to the DC jack of the product. If the product fully charged, …