Steca TK-RW1 Installation And Operating Instructions Manual

8, 8 733.847 | 10.27 EN 4.3.4 Other symbols and markings Symbol Meaning ✓ Precondition for action  Call to action  Result of action • List Emphasis Emphasis 5 Mounting and installation 5.1 Mounting the router The device can be mounted on the wall or the ceiling. 1. Locate…

17, 17 733.847 | 10.27 EN 10.1 Causes of faults in the wireless LAN router Problem Cause / Remedy The time display in the system image is not updated or the message "Note: wireless LAN router is waiting for data from the solar controller. Please check the cable connection between the …

3, 3 733.847 | 10.27 EN 9 Appendix: adding your own images to the slide show ....15 9.1 Requirements to your own pictures ....................................... 15 9.2 Procedure for inserting your own images .............................. 16 10 Fault finding .....................................…

13, 13 733.847 | 10.27 EN 7.3.1 System image ;1.1: System image active: 1, inactive: 0 system_active = 1 System_active is preset in the factory to 1, so the system image can be selected and displayed in the digital picture frame. If system_active is set to 0, the system image canno…

14, 14 733.847 | 10.27 EN has to be set under “Wireless LAN password”. This password is required for access authorisation for the digital picture frame. NOTE Config.wri may only be opened with Microsoft® WordPad! ;2.4: Wireless LAN encryption ("OPEN", "WEP", &quo…