Pro-Form endurance 720 e Operation & User’s Manual

8, 8 PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for as…

14, Pro-Form endurance 720 e 14 11 11. Orient the Right Pedal Arm (58) as shown. Apply grease to the axle on the Right Pedal Arm (58). Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 14mm Shoulder Screw (126), a Small Axle Cover (55), and an M8 Washer (97). Repeat this step …

31, 31 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gene…

28, 28 HOW TO USE AN IFIT WORKOUT You must have an iFit module to use an iFit workout. To purchase an iFit module at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. To use an iFit module, you must have the following: • A computer with an internet…

2, 2 TABLE OF CONTENTS WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at ac…

35, 35 1 1 Frame 2 1 Rear Stabilizer 3 1 Ramp 4 1 Upright 5 6 M4 x 19mm Screw 6 1 Front Stabilizer 7 1 Console 8 2 Roller Guide 9 1 Right Pedal Plate 10 1 Ramp Cover 11 1 Incline Motor 12 1 Incline Motor Arm 13 1 Ramp Arm 14 1 Ramp Ro…