Viqua H Owner's Manual

29, Remarque : après avoir installé la lampe UV ou le manchon, effectuez la procédure de désinfection, consultez la Section 3.2. 3.2 Procédure de désinfection La désinfection par UV est un processus physique qui n'ajoute à l'eau aucun produit chimique potentiellement nocif…

13, Maintenance Procedure: 1 2 1 • Remove the sleeve bolt from top of the sleeve assembly. 2 1 2 3 • Remove screw from the sleeve bolt. • Remove the sleeve bolt at the bottom of the sleeve assembly. 3 • Insert the sleeve removal tool into the bottom of the sle…

11, Section 4 Maintenance 4.1 Replacing UV Lamp UV lamp replacement is a quick and simple procedure requiring no special tools. The UV lamp must be replaced after 9000 hours of continuous operation (approximately one year) in order to ensure adequate disinfection. Procedure: WARNING • Alw…

15, Operation Section 5 Operation 5.1 Control Panel Figure 3 Control Panel Buttons and Display Feature Description Function AMute Press to silence audible alarm. When the alarm is due to the lamp's age, the mute button will silence the audible alarm for 7 days; this may be repeated up to a maxim…

7, Viqua H General Information 54 7 2.2 Pipe Lengths The recommended minimum straight pipe lengths for the various piping configurations are: Note: Flow Meter Sensor must be mounted in the following orientation with the LED facing up. Ensure all air is purged from the piping and Flow Meter Senso…

5, General Information 56 5 Section 2 General Information Figure 1 System Components Item Description Part Number UV Systems 1 Controller 650709-003 PRO10 650709-006 PRO20 650709-009 PRO30 660020-R PRO50 650709-005 H Plus 660019-R K Plus 650709-004 H 660018-R K 2 Top Bolt and Wireform …